|
◊
Sealers:
-
Helpful Tips offered by Glaze 'N Seal:
1. Begin with a
clean, dry* porous surface.
2. Read product package directions carefully.
3. Do a test application and evaluate before
proceeding with a large project.
4. For coating type sealer - apply thin even,
multiple coats.
For penetrating type sealer - apply liberal coating.
5. Do not allow sealer to puddle on surface (brush
out before they dry).
6. Allow sealer to cure before exposure to water, heavy traffic
& contaminants. 7. Reseal as necessary.
*Test
to make sure that the product is dry before applying any sealers to it.
A good way to test this is by placing plastic on top of the product to
see if there is any water evaporation. Sometimes the product may
appear to be dry on the surface but below there might be water still
trapped underneath.
|